Abathengi abaninzi beebhuthi zokubuyisela banenkxalabo malunga nendlela yokucoca iibhuthi zokubuyisela. Ngokuqinisekileyo baya kufumana uthuli emva kokusebenzisa iibhutsi zokucinezela amaxesha amaninzi. Kodwa akukho namnye wabathengisi beebhutsi zokubuyisela owake wafundisa abathengi indlela yokucoca iibhutsi zokucinezela umoya. Not Therabody recoveryair Iibhutsi zeJet AyiyoNyanga yokubuyisela emoyeni Prime, Not Therabody recoveryair Pro.Kodwa MAXTORC.
Ukungena kwamanzi
Ukuqhekeka kombhobho
Ilogo iyaphela
Ayifani neeofisi zonyango lomzimba zinebhodi yophawu.Kuba uphawu lweebhutsi zoxinzelelo lomoya lwenziwa kwimilenze yeebhulukhwe, kwaye lwenziwa ngokunitha okanye ukusebenzisa iilebhile. Emva koko ukuhlamba kuya kubangela ukuba isihloko senkqubo yoxinzelelo siwe, kwaye ne-knitted slip iya kulahlekelwa ngumbala. Ukuqinisekisa ukuba i-logo yenkqubo yoxinzelelo ikhanya, kuyacetyiswa ukuba ungayihlambi imveliso ngamanzi.
Isilumkiso
Isiphelo
This is the most common situation the intermittent pneumatic compression devices users met. We must know it is essential that the pneumatic compression, also called the leg recovery system, can’t be washed in water. Otherwise, it won’t be able to increase limb blood flow. We should wipe out the dust on the leg recovery system. Also, every brand recovery tool should follow.
Pipeline cracking
Air is introduced from the air pump of the main machine into the airbag of the air compression boots using the hose. After the air compression is washed with water, the hose will be cracked again after drying due to moisture, resulting in air leakage. This will cause the function of increased blood flow to become weaker, and the compression therapy pressure levels lower down.
The air leakage of the hose will also cause the airbag to be insufficiently inflated. The air pressure detector always displays insufficient air pressure and keeps the air pump inflated. In the end, some intact airbags may explode due to excessive inflation.
So in case to protect the blood flow function, stay at the original pressure levels. The more complex your effort spent on how the compression system increases blood flow, the longer you will get using it longer.
Logo fading
Not like the physical therapy offices have a brand board.Because the logo of the air compression boots is made on the legs of the pants, and it is made by knitting or using labels. Then washing will cause the title of the compression system to fall off, and even the knitted slip will lose color. To ensure that the logo of the compression system is bright, it is recommended not to wash the product with water.
Most clients have customization requirements for the compression therapy system. Usually, the logo covers the entire leg like a rapid reboot.
Caution
The cleaning method of the recovery boots can only be to clean the appearance with a wet rag slowly. Any washing or dry cleaning may damage the arrival of the recovery boots.
Conclusion
Here, I recommend that MAXTORC recovery boots users do not use the air compression boots in a dirty environment as far as possible and use them indoors or outdoors, like on the lawn. This is conducive to keeping clean, reducing the number of cleaning, and extending the service life.
